Tips to reinstall windows XP via CD Bios

TIPS RE-INSTALL windows XP lewat Bios CD

1. Prepare a Windows XP installer CD complete with serial number
2. Turn on the computer and insert it into CDROM / DVDROM

3. Go into the computer's BIOS by pressing F2 tombolDEL or shortly after you press the power button

4. Once inside the BIOS set to boot the computer via the CDROM / DVDROM melauiMenu then select Boot Device Priority Boot item.

  
5. Change the 1st Boot Device to boot from the CDROM by pressing the + or - on the keyboard. Then save by pressing F10, then restart your computer

6. When you are prompted to press any key, PRESS ANY KEY TO BOOT FROM CD ... press any key as soon as possible
7. Wait a minute process after that press Enter to complete the installation process of Windows XP, instead of R to repair windows because menggunakanRecovery consule or F3 to end the install process
8. Agreement appears Lisencing press F8 for advanced

9. If the disk partition has not been as shown below, press C to create a new partition on the hard drive

10. Input capacity of the partition to be made in units of megabytes (MB) and press Enter to create a partition

11. Then press the Enter key to continue the installation process of Windows XP or Delete to delete the partition.

12. Select only the NTFS file system (Quick) and press Enter

  

13. Wait until the process is complete until the computer restarts again so that it appears the picture below

14. When the following screen appears click Next

15. Fill up your name and organization and then press Next

  
16. Fill out the Product Key or Serial Number of type windows you sure that you press Next once again

17. Wait until you are done filling up the computer name and password. You must fill in the name of the computer, but the password is ignored, then press Next

  
18. Set the Set Time Zone in the position click Next

19. Select Typical settings for the default windows network option or Custom settings to manually set your network and click Next.

20. When the computer is connected to the LAN with a particular domain select the option Yes, then fill with the same name DOMAIN DOMAIN LAN and vice versa if it is not connected to LAN or LAN connected but No DOMAIN select option and press Next 

  
21. Then click OK, Next, Skip and Finish

22. Congratulations you are a successful installation, now you just install your hardware drivers that are not plug and play with the default Windows XP drivers